Once the Fire Department is called to a scene, they assess the size of the inferno and determine a course of action. If it is huge, a lot of water will be used. However, if the building has protection like water sprayers attached to the ceilings, they will have managed the worst of it and prevented escalation. Thus, the department will use less water. This means less damage to property from either water or inferno. With this in mind, one must ensure fire sprinkler service Dallas is done as often as prescribed.
This exercise should not be much of a bother as the standard frequency is once per annum. It may be done more than once. However, a few events mandate inspection. Like remodeling for example. Or, change in tenancy. Even when there is a change in the water supply or a meter is modified. These events require that one check that the system will still work under the new conditions.
However, to ensure all things remain as they should one should ensure to follow simple guidelines. For example, the head should not be painted over. Things should not be hanged from it either. Boxes should not be stacked so high that they may hinder action. There should be at least 18 inches of room below the head. Ensure to report damage or suspicions of malfunction. Keep the control valves open at all times. Confirm that this is the position as often as possible.
Before moving into new remises, one must check to see if the previous tenants kept things on the up and up. There should be tags somewhere indicating the last inspection date. Also, look out for dust and other signs of neglect that could indicate lack of inspection. Once the deal is signed, perform own inspection. The company should be able to give an estimate of the cost to bring the premise up to code.
Just because a professional will be called in every few months for an inspection does not mean one should remain ignorant of the system all together. What if the contractor is dodgy and they charge for things completely unrelated to the system just for gags? Find out if the system is wet, dry, or alternate. Wet is obviously one that uses water, dry is one that uses air and alternate is one that uses either in different seasons.
One may also want to know what material the piping is made of. This is especially important if one is moving into a new building. They may want to upgrade the pipes. Some pipe materials might not be suitable for the system.
Also, learn about the system control. Is there a mechanism in place to ensure that the control valves always stay open? This should prevent accidental locking at inopportune times. Is there backflow protection to ensure prevention of contamination? Most of the aspects of system control are quite technical but no harm knowing what is what.
Provision of these protective fixtures is a right of every occupant of the building. It is required. It also gives one peace of mind that if an incident occurs, things will not look too bad. Not to mention well-maintained fixtures may attract discounts from insurance companies.
This exercise should not be much of a bother as the standard frequency is once per annum. It may be done more than once. However, a few events mandate inspection. Like remodeling for example. Or, change in tenancy. Even when there is a change in the water supply or a meter is modified. These events require that one check that the system will still work under the new conditions.
However, to ensure all things remain as they should one should ensure to follow simple guidelines. For example, the head should not be painted over. Things should not be hanged from it either. Boxes should not be stacked so high that they may hinder action. There should be at least 18 inches of room below the head. Ensure to report damage or suspicions of malfunction. Keep the control valves open at all times. Confirm that this is the position as often as possible.
Before moving into new remises, one must check to see if the previous tenants kept things on the up and up. There should be tags somewhere indicating the last inspection date. Also, look out for dust and other signs of neglect that could indicate lack of inspection. Once the deal is signed, perform own inspection. The company should be able to give an estimate of the cost to bring the premise up to code.
Just because a professional will be called in every few months for an inspection does not mean one should remain ignorant of the system all together. What if the contractor is dodgy and they charge for things completely unrelated to the system just for gags? Find out if the system is wet, dry, or alternate. Wet is obviously one that uses water, dry is one that uses air and alternate is one that uses either in different seasons.
One may also want to know what material the piping is made of. This is especially important if one is moving into a new building. They may want to upgrade the pipes. Some pipe materials might not be suitable for the system.
Also, learn about the system control. Is there a mechanism in place to ensure that the control valves always stay open? This should prevent accidental locking at inopportune times. Is there backflow protection to ensure prevention of contamination? Most of the aspects of system control are quite technical but no harm knowing what is what.
Provision of these protective fixtures is a right of every occupant of the building. It is required. It also gives one peace of mind that if an incident occurs, things will not look too bad. Not to mention well-maintained fixtures may attract discounts from insurance companies.
About the Author:
Protect your business premises by using a dependable fire sprinkler service Dallas area. To know more just visit the following website at http://www.rhinofireprotection.com.
I found your blog very interesting and informative. Thanks for sharing.
Fire Sprinkler Company